Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 06:32

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This is where the MOV conducts again, and dissipated the energy.

Now when you have a certain ac resistance, then a current flows in a loop.

(Dc diagram shown, AC is similar).

Willi Castro homers twice, Royce Lewis ends skid as Twins crush Athletics - Sports Illustrated

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Can the fuse protect the electronic devices from lightning instead of a surge protector.

nine

Pamela Bach’s heartbreaking final message to her daughter revealed three months after her death - Page Six

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–14 [Omar Gharbi Omar Gharbi ]

but this device (an Inductor) … impedes the rapid changes in the current.

The #1 Vegetable for Lowering Blood Sugar, Recommended by a Dietitian - AOL.com

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Can I see some saggy tit pics and huge areolas pics?

What is lightning?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The third is lightning and “how it gets conducted into a home.”

'In our spacesuit collection for movies, we have replicas of pretty much every historic spacesuit that's been into space.' How the son of an aerospace machinist built some of Hollywood's most iconic astronaut looks (exclusive) - Space

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

but I think this circuit , shows a few more pieces.

A fuse is a non-resetable over current circuit protector.

‘Amazing Worlds of Science Fiction and Science Fact’ Review: An Education in Exoplanets - WSJ

This is where this question deviates from being a 'generic' question, and becomes more specific.

The bolt then partially travels down the line to your home.

Upvotes:

Pacific sediment cores unlock millions of years of climate history - Earth.com

In schematic diagrams this is the symbol for a fuse:

Because the load is inductive, the current lags the voltage.(by a bit).

There are three different concepts here that are getting confused.

My son died seven months ago at the age of 24 how do I know if he’s in heaven and can he see me and hear me and why have I not gotten any signs yet from him or Mom just not seeing the signs how do I know if he’s OK how do I know if he’s happy?

But… the neutral is now “floating” because of the 1 ohm resistance.

There are two important concepts here.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Is there a possibility that we are living in a simulation and that there is a concept of rebirth?

One

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

the problem then depends on "how fast does the fuse operate?".

—— which songs do certain kuorans remind you of?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

He then describes Rainy Season and Lightning.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

[image of Common-mode choke]

But it can get overloaded, and no longer works.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

The other is “what does a “fuse” do?”

[old diagram got deleted by accident]

a photo is worth a thousand words.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

A circuit breaker is similar, but is resettable.

This one hit behind the barn.

2024–10–16 [ OO OLAOYE OYEBODE ]

This is the picture of an electronic coil of wire wound around a core of magnetic material.

These devices are installed between the “hot” and “neutral” and protective ground.

It seems Mohan does not understand the difference between a comment and an Answer.

This device then solves the entire problem.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Here is a simplified AC power diagram.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

It also is a device that limits the change in current flow.

2024–10–10[John johnson John Johnson ]

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

At one ohm, the resistor has a maximum of 1 watt power.

First Sentence:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So, the voltage could go up to 500 volts, and the fuse will not open up.

At least they know the answer if they wanted it.

He then describes the function of a fuse.

I post the exact comment here.

Edit 2024–10.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

An AC voltage/ current source, and an ac inductive load.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

what exactly is a ‘surge’ protector?

One is “what exactly is in a ‘surge protector’ ? ”

so, what happens?

These are simplified answers to the original question, and does not change anything I wrote above.

Barnstars:

This is 'the assistant's answer'

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

eight

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

The MOV will conduct when the voltage exceeds 50% of line voltage.

For this case there are devices called Metal oxide varistors (MOV).

What does a fuse do?

He then asserts :

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.